Maintenance Table - Malaguti Centro 125 IE User Manual

5.2

MAINTENANCE TABLE

CHECKS AND REPLACEMENT
Spark plug (condition and electrode gap)
Engine oil and filtering net (CHECK EVERY 500 KM)
Final transmission oil
Valves (clearance)
Fuel pump filter
V-belt
Clutch weights
Primary speed variator rollers
Variator pulley bushing and clutch bearing (greasing)
Tightness of the braking system pipes - Injection system
Air filter (suction and transmission)
Battery condition and charge level
Wear: brake pads - discs
Level and density of coolant (replace every 2 years) - Manifold tightness
Braking system fluid
Wheel bearings
Chassis linkages (or levers)
Steering system operation and play (lubricate if necessary)
Operation and tightness of fork and shock absorbers
Tightness of nuts and bolts
Tightness of centre stands - Pivot lubrication
Operation of sidestand switch - Lubrication
Tire pressure - tread wear
Final check: tires, pressure, lighting, warning devices, switch functions,
road test
Note: maintenance operations should be performed more frequently if the vehicle is used in rainy weather, in dusty places
or on rough terrain.
Due to their simplicity, checks with no asterisk CAN also be carried out by technicians not authorised by
MALAGUTI, but under their direct responsibility.
Nr. :
coupon
OPERATIONS
: :
check clean
1 2 3
FIRST 4.000 km 8.000 km
1.000 km (2.496 mi) (4.992 mi)
(624mi) or 12 months or 24 months
*
*
*
*
*
*
*
*
*
*
*
every 24 months or 12.000 Km
*
*
*
*
*
*
*
: :
adjust replace
4 5 6 7
12.000 km 16.000 km 20.000 km 24.000 km
(7.440 mi) (9.984 mi) (12.480 mi) (14.880 mi)
every 48.000 Km
every 2.000 Km
27
1
2
3
4
5
6
ENG