Malaguti Centro 125 IE User Manual page 137

5.14.3 TAIL LAMP (WITH STOP LIGHT)
• Parking light (B‑Fig.38)
Bulb 12V - 5W (W5W)
• Stop light (S‑Fig.38)
Bulb 12V - 10W (R10W)
• Rear turn indicator (E‑Fig.38)
Bulb 12V - 10W (R10W)
Note: visually check if the stop light works properly,
by pulling one of the two brake levers.
V
E
P
W
S
B
REPLACING LAMPS
• Remove number plate light (see par.5.14.1).
• Remove cover of tail light (F‑Fig.38) by loosening the
2 screws (V‑Fig.38). Pay attention not to scratch the
cover.
• Remove the parabola (P‑Fig.38) by loosening the 2
screws (W‑Fig.38).
Parking light (B‑Fig.39)
• Remove the lamp socket inside the lamp.
• Replace the light bulb.
• Refit the rubber lamp socket (by pressing) and the
cover.
Stop light (S‑Fig.40) and turn indicator (E‑Fig.40)
• Remove the coloured cap, secured to the lamp by
F
means of two hooks.
• Replace the light bulb.
• Refit the coloured cap and cover.
V
When performing the operations described
above, pay attention not to damage parts nearby
(transmission, wiring, gaskets, etc.)
B
W
Fig.38 Fig.39
S
E
Fig.40
39

2
3
4
5
6
ENG