National Instruments FieldPoint FP-1600 User Manual page 67

Index
N
National Instruments Web support, D-1 to D-2
Network Device Configurator, B-2
networks. See also Ethernet network.
specifications, C-1
watchdog timer, 4-1
O
Object Linking and Embedding for Process
Control (OPC) server. See OPC server.
online problem-solving and diagnostic
resources, D-1
OPC server
overview, 1-4
using with FP-1600, 3-19 to 3-20
P
panel mount. See mounting to panel.
Plug and Play. See HotPnP (Hot Plug and
Play).
power connection, 2-8 to 2-9
calculating power for FieldPoint
bank, 2-9
power connector pinout (figure), 2-9
POWER LED, B-5
powering on the FP-1600
HotPnP during, 4-4
procedure for, 2-10
power-on self test (POST), 2-10, 4-6
power-up state, programmable, 4-3 to 4-4
problem solving. See troubleshooting.
PROCESS LED, B-5
R
removing FP-1600 and terminal bases
DIN rail mount, 2-3
panel mount, 2-5
FieldPoint FP-1600 User Manual
resetting FP-1600 to factory configuration,
A-1 to A-3
RX LED, B-6
S
ScreenTips, 3-2 to 3-3
serial number information (note), 2-1
SnapShot feature, 4-2 to 4-3
software. See FieldPoint software.
software-related resources, D-2
specifications
compliance, C-2
environment, C-1
network, C-1
STATUS LED
flashes and corresponding error
conditions (table), B-6
overview, B-5
T
TCP/IP settings, viewing and editing, B-2
technical support resources, D-1 to D-2
terminal base connections
DIN rail mount, 2-2 to 2-3
I/O module, 2-5 to 2-6
panel mount, 2-4 to 2-5
ToolTips, 3-1 to 3-12
troubleshooting
configuration troubleshooting, B-3 to B-4
editing HOSTS files, B-1
LED indicators, B-5 to B-6
problem-solving and diagnostic
resources, online, D-1
using Network Device Configurator, B-2
viewing and editing FP-1600 TCP/IP
settings, B-2
TX LED, B-5
I-4 www.natinst.com