National Instruments FieldPoint FP-1600 User Manual page 65

Index
Comm Resource Configuration dialog
box (figure), 3-5
Device Properties window (figure), 3-9
Ethernet parameters, 3-6 to 3-8
finding and configuring devices,
3-10 to 3-13
getting started, 3-3 to 3-6
IP address, 3-7 to 3-8
Network Devices window (figure), 3-6
overview, 1-3
ScreenTips, 3-2 to 3-3
setting FP-1600 properties, 3-9
setting properties, 3-9
ToolTips, 3-1 to 3-12
window (figure), 3-4
FieldPoint software
BridgeVIEW server, 1-3, 3-13 to 3-14
installation, 2-10
LabVIEW VIs, 1-3, 3-16 to 3-18
LabWindows/CVI functions, 1-3, 3-18
Lookout software, 3-15 to 3-16
OPC server, 1-4, 3-19 to 3-20
overview, 1-2 to 1-4
finding and configuring devices, 3-10 to 3-13
FP-1600 hardware
configuration, 3-1 to 3-13
getting assistance, 3-1 to 3-13
resetting FP-1600 to factory
configuration, A-1 to A-3
troubleshooting, B-3 to B-4
using FieldPoint Explorer,
3-3 to 3-13
using Network Device
Configurator, B-2
Ethernet network setup (figure), 1-2
high-speed local bus, 4-1
HotPnP (Hot Plug and Play), 4-4 to 4-6
installation
cabling, 2-7 to 2-8
connecting FP-1600 to network,
2-6 to 2-7
FieldPoint FP-1600 User Manual
mounting I/O modules onto terminal
bases, 2-5 to 2-6
mounting on DIN rail, 2-1 to 2-3
mounting to panel, 2-3 to 2-4
power connection, 2-8 to 2-9
powering on the FP-1600, 2-10
serial number information (note), 2-1
network watchdog timer, 4-1
overview, 1-1 to 1-2
power-on self test (POST), 2-10, 4-6
programmable power-up state, 4-3 to 4-4
resetting to factory configuration,
A-1 to A-3
SnapShot feature, 4-2 to 4-3
troubleshooting
configuration troubleshooting,
B-3 to B-4
editing HOSTS files, B-1
LED indicators, B-5 to B-6
using Network Device
Configurator, B-2
viewing and editing FP-1600 TCP/IP
settings, B-2
using with other applications,
3-13 to 3-20
FieldPoint BridgeVIEW server,
3-13 to 3-14
FieldPoint OPC server, 3-19 to 3-20
LabVIEW VIs, 3-16 to 3-18
LabWindows/CVI functions, 3-18
Lookout, 3-15 to 3-16
H
hardware. See FP-1600 hardware.
high-speed local bus, 4-1
HOSTS files, editing, B-1
under Windows 95/98, B-1
under Windows NT 4.0, B-1
HotPnP (Hot Plug and Play), 4-4 to 4-6
inserting new I/O modules, 4-5
I-2 www.natinst.com