Product Certifications - Emerson Rosemount 3051 Series Quick Start Manual

Quick Start Guide
7

Product Certifications

Rev 1.4
7.1 European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at Emerson.com/Rosemount.
7.2 Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine that
the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
7.3 North America
E5 USA Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate: 0T2H0.AE
Standards: FM Class 3600 – 2011, FM Class 3615 – 2006, FM Class 3810 –
Markings:
I5 USA Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: 1Q4A4.AX
Standards: FM Class 3600 – 2011, FM Class 3610 – 2010, FM Class 3611 –
Markings:
Special Conditions for Safe Use (X):
1. The Rosemount 3051 Transmitter housing contains aluminum and is
considered a potential risk of ignition by impact or friction. Care must
be taken into account during installation and use to prevent impact
and friction.
22
2005, ANSI/NEMA 250 – 2003
XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F, G; CL III; T5(–
50 °C ≤ T ≤ +85 °C); Factory Sealed; Type 4X
a
2004, FM Class 3810 – 2005
IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G; Class III; DIV 1
when connected per Rosemount drawing 03031-1019; NI CL 1,
DIV 2, GP A, B, C, D; T4(-50 °C ≤ T
≤ T ≤ +40 °C) [HART]; T4(–50 °C ≤ T
a
PROFIBUS]; Type 4x
≤ +70 °C) [HART], T5(–50 °C
a
≤ +60 °C) [Fieldbus/
a
Emerson.com/Rosemount
February 2019