Parameter Access 2 Objects (0X65) - Toshiba TOSVERT VF-AS3 Instruction Manual

4.9. Parameter access 2 Objects (0x65)

This object provides access to the Inverter parameters following range.
Input Instance
0x0001-0xFE99
* If you want to access to drive parameter [AU1], you can access the communication number 0x0000
(communication number of [AU1]) by using the instance 0x1000.
Class Attributes
Instance Attribute ID Access
1 Get
2 Get
3 Get
0
6 Get
7 Get
Class Services
Service Code Service Name
0x0E Get_Attribute_Single
Instance 1 Attribute
Instance Attribute ID Access
0x0000 –
3 Get/Set
0xFE99
Instance Services
Service Code Service Name
0x0E Get_Attribute_Single
0x10 Set_Attribute_Single
Attribute ID for all parameter access is 3. Moreover, about the instance ID of each parameter, it becomes
"parameter communication number".
About the details of the contents of a parameter please refer to VF-AS3 instruction manual.
Example 1:
When "ACC. time" is set to 5 s, since the minimum unit is 0.1s,
5 / 0.1 = 50 = 0x0032
Since the communication umber of "Acc. time" is "0009", it writes "0x0032" is instance ID "0009."
When you use this object, the value is written to the EEPROM.
Inverter parameter communication No.
0x0001-0xFE99
Name
Revision
Max Instances
Number of Instances
Max ID of class
attributes
Max ID of instance
attribute
Read one attribute
Name
parameter
Read one attribute
Write one attribute
Notes
Data type Details
UINT Revision of this object
UINT Maximum instance number of an
object currently created in this class
level of the device.
UINT Number of object instances currently
created at this class level of the
device.
UINT The attribute ID number of the last
class attribute of the class definition
implemented in the device.
UINT The attribute ID number of the last
instance attribute of the class
definition implemented in the device.
Description of Service
Data type Details
Parameter corresponding to the Instance
UINT
address
Description of Service
57
E6582125
Value
2
0xFFFF
0xFFFF
7
3