Table of Contents
Advertisement
Power socket
Connect the power cable to the switch PS3016S with an AC power supply of 100-240V to
50/60Hz
Ground terminal
Use a wire ground to prevent lightning strikes. To avoid lightning strikes on the product and
extend the life of the product
Chapter 2 Installation
2.1 Installation Precautions
◼
⚫
⚫
⚫
⚫
⚫
Temperature and humidity
Note：To avoid improper use of equipment damage and personal injury, please
observe the following precautions
Installation safety precautions
The power should be kept off during the installation, while wearing anti-static wrist,
and to ensure well touch between anti-static wrist and skin to avoid potential safety
hazard;
The switch just work normally when it is powered by the correct power supply. Make
sure that the power supply voltage matches the voltage indicated by the switch
Before powering on the switch, make sure that the power circuit is not overloaded,
which may affect the normal operation of the switch and even cause unnecessary
damage
To avoid the risk of electric shock, do not open the case while the switch is working.
Do not open the case even when it is not powered
Before cleaning the switch, unplug the switch from the power cord and do not wipe it
with wet cloth. Do not wash it with liquid
To ensure the long-term stability working of the switch , please maintain a certain
temperature and humidity environment. High or low humidity easily lead to leakage of
insulation materials, deformation and even the corrosion of metal parts, the
temperature is too high will accelerate the aging process of insulating materials,
Advertisement
Table of Contents
