System-Defined Presets; On-Screen Displays - HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual

System-Defined Presets

Purpose:
The section lists the system-defined presets with special functions. These presets cannot be edited, but
can be called only through a control device, e.g. a DVS or Web browser. To call the system-defined presets
remotely, choose the preset number from the list in the PTZ control panel. Refer to table below for details.
EXAMPLE: Preset 99 is "Start auto scan." If you call preset 99, the speed dome starts auto scan.
Table 2-2 System-Defined Presets
Preset No. Function
33 Auto-flip
34 Return to home position
35 Patrol 1
36 Patrol 2
37 Patrol 3
38 Patrol 4
39 IR cut filter in
40 IR cut filter out
41 Pattern 1
42 Pattern 2
43 Pattern 3
44 Pattern 4
46 Enable fast patrol
90 Enable wiper

On-Screen Displays

The speed dome supports the following on-screen displays:
• Zoom Ratio: Identifies the amount of magnification. The format is Zxxx. xxx is the zoom amount.
• PT Angle: Displays panning and tilting direction, in the format NExxx/Txxx. NExxx indicates degrees in
the northeast direction, while Txxx indicates degrees in tilt position.
• Alarm: When an alarm is triggered, the corresponding information will be displayed.
• Time: Displayed as Day/Month/Year/Day of Week/Hour/Minute. It supports 24-hour time system.
• Preset Label: After you call the configured preset, the preset number is displayed if the lens moves to
the location for which you've set a preset.
• Zone: Displays the zone title.
• Address: Displays the speed dome's address.
UM THD DS-2AE7232T-x 020519NA
Preset No. Function
92 Enable limits
93 Set manual limits
94 Remote reboot
95 Access main menu
96 Stop scanning
97 Start random scanning
98 Start frame scanning
99 Start auto scanning
100 Start tilt scanning
101 Start panorama scanning
102 Patrol 5
103 Patrol 6
104 Patrol 7
105 Patrol 8
11