Configuring The Focus Settings - HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual

Configuring the Focus Settings

Setting the Focus Mode
1. Move the cursor to FOCUS using the direction buttons and click IRIS+ to enter.
2. Click up/down direction buttons to set the focus mode to AF, MF, or HAF.
• AF (Auto-Focus): The lens remains in focus during PTZ movements.
• MF (Manual Focus): You need to adjust the focus with Focus+ and Focus- buttons manually.
• HAF (Half-Auto Focus): The speed dome focuses automatically only once after panning, tilting,
and zooming.
3. Click the IRIS+ button to save the settings.
Setting the Focus Limit
Purpose:
This function limits the minimum focus distance. You can configure the focus limit longer when the target
is at a distance, to avoid the speed dome focusing on the objects close to it; or configure the focus limit
shorter when the target is near the speed dome, and avoid it focusing on the father objects.
UM THD DS-2AE7232T-x 020519NA
Figure 8, Camera Settings
19