Safety Instruction - HIKVISION DS-2AE7232TI-A User Manual

Hd-tvi speed dome
Hide thumbs Also See for DS-2AE7232TI-A:
Table of Contents

Advertisement

HD-TVI Speed Dome DS-2AE7232TI-A User Manual

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid danger or
property loss.
The precaution measure is divided into "Warnings" and "Cautions":
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Follow these safeguards to prevent
serious injury or death.
Warnings:
• Adopt a power adapter that can meet the safety extra low voltage (SELV) standard. Refer to the
specification manual for the standard of power adapter and the power consumption cannot be less
than the required value.
• Do not connect several devices to one power adapter as an adapter overload may cause over-heating
and can be a fire hazard.
• If the product is installed on a wall or ceiling, the device should be firmly fixed.
• To reduce the risk of fire or electrical shock, do not expose an indoor product to rain or moisture.
• This installation should be made by a qualified service person and should conform to all local codes.
• Install blackout equipment into the power supply circuit to address supply interruption.
• If the product does not work properly, please contact your dealer or the nearest service center. Never
attempt to disassemble the product yourself. (We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
Cautions:
• Make sure the power supply voltage is correct before using the product.
• Do not drop the product or subject it to physical shock. Do not install the product on vibratory surface
or places.
UM THD DS-2AE7232T-x 020519NA
Warnings
Cautions
Follow these precautions to prevent
potential injury or material damage.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents