HIKVISION DS-2AE7232TI-A User Manual page 29

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
B. Click IRIS+ to enter.
C. Click the up and down buttons to choose the preset number to edit. If the preset has been defined,
the preset label will be listed under the number; if it has not been defined, you will see the
information UNDEFINED under the number.
NOTE:
• Up to 256 presets can be set for the speed dome.
• The system-defined presets will be displayed on this submenu and they are not editable.
3. Set the preset position.
A. Move the cursor to PRESET PTZ and click IRIS+ to edit the preset position.
B. Use the direction buttons to move the speed dome to find the desired scene/position.
C. Ppress IRIS+ to confirm the settings and return to the previous menu, or press IRIS- to cancel.
NOTE: The preset position settings will be restricted by the limits if they are defined.
4. Call up the preset. You can select the preset number from the drop-down preset list in the control
panel of the encoder through a Web browser and click the arrow to call a user-defined or system-
defined preset.
5. Clear the preset settings. Move cursor to CLEAR and click IRIS+ to clear the current preset settings.
Configuring Patrols
Purpose:
A patrol is a scanning track specified by a group of user-defined presets. You can call a patrol to scan the
scenes automatically among the user-defined presets in sequence.
1. Move the cursor to enter the patrol configuration submenu: MAIN MENU > DOME SETTINGS > PATROLS.
UM THD DS-2AE7232T-x 020519NA
Figure 13, Preset Configuration Menu
29