HIKVISION DS-2AE7232TI-A User Manual page 30

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
2. Choose the patrol number.
A. Move the cursor to PATROL NUM and click IRIS+ to enter editing mode.
B. Click the up and down direction buttons to select the patrol number to be configured.
C. Click IRIS+ again to confirm the settings and exit editing mode of this column.
NOTE: Up to 10 patrols can be configured.
3. Edit the patrol.
A. Move the cursor to EDIT PATROL, and click IRIS+ to enter editing mode.
B. Click up/down direction buttons to choose the number and locate the preset to be edited.
C. Click left/right direction buttons to position the cursor to the column of PRESET, DWELL, and
SPEED. You can click the up/down direction buttons to set the value of preset number, dwell time,
and patrol speed.
NOTE: The presets you set for a patrol should be the ones that have been pre-defined by users.
The dwell time (15 to 800 seconds is selectable, which are divided into 30 levels) is the time
UM THD DS-2AE7232T-x 020519NA
Figure 14, Patrol Configuration Menu
Figure 15, Edit the Patrol
30