HIKVISION DS-2AE7232TI-A User Manual page 35

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
2. Choose the zone number:
A. Move the cursor to ZONE NUM. and click IRIS+ button to enter the editing mode.
B. Click the up and down buttons to select the zone number to be configured.
C. Click IRIS+ again to confirm the settings and exit the editing mode of this column.
NOTE: Up to eight zones can be configured.
3. Configure the zone area.
A. Move the cursor to EDIT ZONE and click IRIS+ button to enter the editing mode.
SET LEFT LIMIT
B. You can see
C. Follow the prompts on the screen to set the right limit.
D. Click IRIS+ button to save the settings and exit.
4. Set the zone status and scan status.
• ZONE STATUS: The zone status just indicates the current status of the zone.
• SCAN STATUS: You can set the scan status to ON/OFF to enable/disable the scanning in the zone.
NOTE: ZONE STATUS is not editable. After you edit the zone, it will switch to ON automatically; if you
delete the zone, the ZONE STATUS will switch to OFF.
5. Clear the zone settings. Move the cursor to CLEAR ZONE, click IRIS+ to clear all the settings of the
current zone, and click IRIS+ again to confirm the settings and exit.
Configuring Smart Settings
Purpose:
Set the smart settings to ON to automatically track the moving object, and meanwhile adjusts the focus
and the position to set the target in the center of the field of view.
1. Move the cursor to enter the smart setting submenu: MAIN MENU > DOME SETTINGS > SMART SETTINGS.
UM THD DS-2AE7232T-x 020519NA
on the screen. Click the direction buttons to set the left limit.
35