Configuring System Information - HIKVISION DS-2AE7232TI-A User Manual

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
2. Click the up/down or left/right buttons in the PTZ control panel to choose a value from the list.
3. Press IRIS+ to confirm the change or click IRIS- to cancel and restore the original value. The cursor
shape will again change.

Configuring System Information

Checking System Information
Purpose:
The system information menu displays the current system information of the speed dome, including
model, address, protocol, etc. The information shown on this submenu is similar to the system
information shown after the power-up action. Please refer to
1. Enter the system information display menu: MAIN MENUS > SYSTEM INFO.
NOTE:
• Information on this menu cannot be edited.
• The temperature refers to the internal temperature of the speed dome.
Configuring System Parameters
Purpose:
You can check and also edit the system information of software address, baud rate, system time, etc. on
the system information settings menu.
1. Go to MAIN MENUS > DOME SETTINGS > SYSTEM INFO SETTINGS.
UM THD DS-2AE7232T-x 020519NA
Figure 4, System Information
Section 2.1
for more details.
14