HIKVISION DS-2AE7232TI-A User Manual page 32

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
3. Edit the pattern.
A. Move the cursor to RECORD PATTERN and click IRIS+ to enter editing mode.
B. Click the PTZ control buttons and direction buttons to operate the speed dome to draw a
movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can
automatically memorize the path you operated as a pattern.
C. Click IRIS+ again to save the pattern and exit editing mode.
• REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the patterns.
When it reaches 0, no more patterns can be configured. You can also see the remaining memory
shown under PATTERNS menu as
• The pan/tilt movements and the lens operations cannot be memorized simultaneously.
4. Preview the pattern. Enter the PREVIEW menu to preview the current pattern.
5. Call the defined pattern. You can call the special presets to call the defined pattern. E.g. call preset 41
to call pattern 1. Please refer to
6. Delete the patterns.
A. To Delete a Chosen Pattern: Click IRIS+ to enter RECORD PATTERN and you can see
Click IRIS+ to delete the pattern.
NOTE: If you delete the current pattern, the following pattern will also be deleted. E.g., if pattern 2
is deleted, pattern 3 and pattern 4 will be deleted as well.
B. To Clear All the Patterns: Enter CLEAR menu and click IRIS+ to delete all the defined patterns.
UM THD DS-2AE7232T-x 020519NA
Figure 17, Edit the Pattern
REMAINING
.
Section 2.2
to find the corresponding preset number for each pattern.
DEL PATH ABOVE
.
32