HIKVISION DS-2AE7232TI-A User Manual page 17

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
2. Move the cursor to the target item and click IRIS+, and click up/down direction buttons to set each
display mode to ON or OFF, and set each display time to 2 seconds, 5 seconds, or 10 seconds.
3. Click IRIS+ button to confirm the settings.
NOTE: If you enable the OSD (On-Screen Display) for both ZOOM SHOW and P/T ANGLE, when calling a
preset, the preset no. will display on the screen until the preset scene passes.
The speed dome shows the viewing direction when you manually control and rotate it.
Table 1-1 Viewing Direction Display
Display N
Indication North
NOTE: The north direction refers to the angle zero.
• Heat Parameter Configuration: You can set the HEAT CONTROL as TEMP (controlled by the temperature),
ON or OFF.
• Fan Parameter Configuration: You can set the FAN CONTROL to TEMP (controlled by the temperature), ON,
or OFF.
• EIS (Electronic Image Stabilization) Configuration: You can set the EIS FUNCTION to ON or OFF, and set the
EIS LEVEL to 0 to 3.
NOTE: The selectable EIS level varies by camera model.
• Preset Direct Focus: You can set the preset direct focus function to ON/OFF on the PRESET DFOCUS
submenu.
UM THD DS-2AE7232T-x 020519NA
Figure 7, Display Settings
NE E
Northeast East Southeast
SE S SW
South Southwest
W NW
West Northwest
17