HIKVISION DS-2AE7232TI-A User Manual page 25

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
D. To modify the configured mask, click the IRIS+ button to enter the SET BLANK menu and click
the IRIS+ button again to edit focus limit.
NOTE: The tilt range for configuring the privacy blanks is from -15° to 60°.
4. Enable or disable the privacy blank function.
A. Move the cursor to BLANK STATUS. Click the IRIS+ button to enter editing mode and click the up
and down direction buttons to set it ON or OFF.
NOTE: If no privacy blank has been configured, you cannot set the status to ON.
B. Delete the privacy blank.
NOTE: You can enter the CLEAR BLANK menu to delete all configured privacy blanks.
Configuring Output Standard
Purpose:
The video output standard, including resolution and frame rate, can be changed according to the actual
requirement.
1. Move the cursor to enter the Video Settings submenu: MAIN MENUS > DOME SETTINGS > VIDEO SET.
2. Move the cursor to VIDEO STD and click IRIS+ to enter the editing mode.
3. Click the up and down direction buttons to select a desired video standard.
4. Click IRIS+ again to confirm and exit the editing mode.
Configuring IR Parameters
NOTE: The IR parameter settings are supported by IR speed domes only.
Purpose:
You can configure the IR parameters including the IR sensitivity, n/m LED current, far LED current,
reference zoom, and LED control, fan control, switch delay, smart IR, etc.
1. Enter the LED parameter submenu: MAIN MENU > DOME SETTINGS > IR PARAMETER.
UM THD DS-2AE7232T-x 020519NA 25