Table of Contents
Advertisement
Panning and tilting:
Click the direction buttons to control the pan and tilt movement of the speed dome.
Zooming:
Click the ZOOM+ and ZOOM- buttons to control the zooming.
Focusing:
Click the FOCUS+ and FOCUS- buttons to adjust the focus.
Iris:
Click the IRIS+ and IRIS- buttons to adjust the iris.
2.3 System-defined Presets
Purpose:
The section lists the system-defined presets with special functions. These presets cannot be edited
but can be only called through a control device, e.g. a DVS or web browser. To call the
system-defined presets remotely, you can choose the preset number from the list in the PTZ control
panel. Please refer to table below for details.
For instance, preset 99 is the "Start auto scan". If you call the preset 99, the speed dome starts auto
scan function.
Preset NO. Function
33
34
35
36
37
38
39
40
41
42
43
44
46
90
2.4 On-screen Displays
The speed dome supports following on-screen displays:
Zoom Ratio: Identifies the amount of magnification. The format is ZXXX. XXX is the zoom amount.
PT Angle: Displays panning and tilting direction, with the format of NEXXX/TXXX. The NE followed
with XXX indicates the degrees in north east direction, while the T followed with XXX indicates the
degrees in tilt position.
HD-TVI Speed Dome User Manual
Table 2-2 System-defined Presets
Auto-flip
Return to home position
Patrol 1
Patrol 2
Patrol 3
Patrol 4
IR cut filter in
IR cut filter out
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Enable fast patrol
Enable Wiper
Preset NO.
Function
92
Enable limits
93
Set manual limits
94
Remote reboot
95
Access main menu
96
Stop scanning
97
Start Random Scanning
98
Start Frame Scanning
99
Start auto scanning
100
Start tilt scanning
101
Start panorama scanning
102
Patrol 5
103
Patrol 6
104
Patrol 7
105
Patrol 8
5
Advertisement
Table of Contents
