Configuring The Zoom Settings; Configuring The Ir Cut Filter - HIKVISION DS-2AE7232TI-A User Manual

Hd-tvi speed dome
Hide thumbs Also See for DS-2AE7232TI-A:
Table of Contents

Advertisement

HD-TVI Speed Dome DS-2AE7232TI-A User Manual
1. You can set the FOCUS LIMIT to 1 CM, 30 CM, 1M, 3M, 5M, and AUTO to make sure that the speed dome
focuses on the target.
NOTE: The focus limit value varies by speed dome model.

Configuring the Zoom Settings

Setting the Zoom Limit
Purpose:
Zoom limit is a user-defined limitation of the zoom amount (zoom amount = optical zoom × digital zoom). If
you set the zoom limit to the minimum value, the digital zoom will be invalid and the optical zoom will
reach the maximum value; if you set the zoom limit smaller, the digital zoom will be enabled.
1. Move the cursor to ZOOM LIMIT using the direction buttons, and click IRIS+ to enter.
2. Click up/down direction buttons to choose the limit from 23, 46, 92, 184, and 368.
3. Click IRIS+ button to confirm.
NOTE: If you set the ZOOM LIMIT minimum value to 22, the digital zoom function will be disabled and
the optical zoom function will be at its maximum value.
Configuring the Zoom Speed
Purpose:
You can define the speed at which the lens changes from full wide zoom to the optical zoom.
1. Move the cursor to ZOOM SPEED using the direction buttons, and click IRIS+ to enter.
2. Click up/down direction buttons to choose the speed from HIGH (default), MEDUIM, and LOW.
3. Click IRIS+ button to confirm.

Configuring the IR Cut Filter

There are two parameters available for IR cut filter configuration.
• IR Cut Filter ­ Can be set to AUTO, DAY, or NIGHT.
AUTO: The speed dome will automatically switch between black and white mode (NIGHT) and Color
-
mode (DAY) based on the lighting conditions. Auto is the default mode.
NIGHT (B/W): You can switch the IR cut filter to black and white mode to increase the lens
-
sensitivity in low light conditions.
DAY (Color): You can switch the IR cut filter to DAY mode in normal lighting conditions.
-
NOTES:
You can call preset 39 to set the IR cut filter mode to DAY mode and call preset 40 to set it to
NIGHT mode.
UM THD DS-2AE7232T-x 020519NA
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents