Wlan Settings - Labkotec idOil-D30 Installation And Operating Instructions Manual

Oil separator alarm device

Hide thumbs Also See for idOil-D30:

Table of Contents

Installation and Operating Instructions | idOil-D30

Figure 46. Factory settings - confirm restoration

After this, the system shows the following message: "Restoring factory settings. Please

reload the web page in a few moments. If the WLAN connection is lost, reconnect the

device."

If necessary, establish the WLAN connection in accordance with section Establishing a

WLAN connection .

Configure the system settings and perform sensor identification.

7.3.3.7. WLAN settings

If the WLAN connection is poor, several devices may be using the same WLAN channel.

You can change the WLAN channel by using the WLAN settings menu to select another

channel and pressing the Save button.

Figure 47. WLAN settings

Establish the WLAN connection again according to the instructions in the Establishing a

WLAN connection section.

41/51

DOC001602-EN-4

Table of Contents

Do you have a question about the idOil-D30 and is the answer not in the manual?