System Settings - Labkotec idOil-D30 Installation And Operating Instructions Manual

Installation and Operating Instructions | idOil-D30
1. Use the network settings of the terminal device to find the WLAN network provided by
the idOil device.
2. Enter the WLAN network password. The password is five zeroes followed by the eight
final characters of the device's serial number. The serial number can be found in the
idOil device's type plate.
If the serial number is 8540564_1112118J, for example, the WLAN password is
000001112118J.
3. Open the web browser of your terminal device and enter the IP address: 192.168.0.1.
A connection has now been formed between the terminal device and the idOil control unit.
The WLAN network will remain active for 10 minutes after terminal devices are no longer
connected to it.
The following sections detail the measures required in connection to initial use.
6.3.2.

System settings

The System settings view shown in the figure is opened in the browser.
Figure 22. System settings
Do the following:
1. Select the desired language as the active language. The default is English.
2. In the Set system date and time fields, enter the
3. Select the Time zone.
4. If necessary, activate the Automatic daylight saving time.
5. Finish by pressing the Save button.
Date: year-month-day
Time: hours-minutes
21/51
DOC001602-EN-4