Customizing And Generating The Core - Xilinx LogiCORE IP Product Manual

Design Flow Steps
This chapter describes customizing and generating the core, constraining the core, and the
simulation, synthesis and implementation steps that are specific to this IP core. More
detailed information about the standard Vivado® design flows and the IP integrator can be
found in the following Vivado Design Suite user guides:
• Vivado Design Suite User Guide: Designing IP Subsystems using IP Integrator (UG994)
[Ref 11]
• Vivado Design Suite User Guide: Designing with IP (UG896)
• Vivado Design Suite User Guide: Getting Started (UG910)
• Vivado Design Suite User Guide: Logic Simulation (UG900)

Customizing and Generating the Core

You can customize the IP for use in your design by specifying values for the various
parameters associated with the IP core using the following steps:
1. Select the IP from the IP catalog.
2. Double-click the selected IP or select the Customize IP command from the toolbar or
popup menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896)
the Vivado Design Suite User Guide: Getting Started (UG910)
Figures in this chapter are illustrations of the Vivado IDE. This layout might vary from the
Note:
current version.
XAUI v12.3 Product Guide
PG053 April 6, 2016
www.xilinx.com
Chapter 7
[Ref 5]
[Ref 6]
[Ref 7]
[Ref 5]
[Ref 6].
Send Feedback
and
105