Rate Control Enable/Disable Setting (Un\G46); Warning Output Setting (Un\G47) - Mitsubishi MELSEC-Q series User Manual

3
SPECIFICATIONS

3.4.10 Rate control enable/disable setting (Un\G46)

(1) Set whether to enable or disable the rate control on each channel.
(2) To validate the settings, ON/OFF of the operating condition setting request (Y9) is
(3) The default setting is all-channel rate control disable.
(4) Refer to Section 3.2.4 for details of rate control function.

3.4.11 Warning output setting (Un\G47)

(1) Set whether to enable or disable the warning output on each channel.
(2) To validate the settings, ON/OFF of the operating condition setting request (Y9) is
(3) The default setting is all-channel warning output disable.
Un\G47
(4) Refer to Section 3.2.3 for details of warning output function.
3
- 34 3.4 Buffer Memory
3.4.10 Rate control enable/disable setting (Un\G46)
required. (Refer to Section 3.3.2.)
b15 b14 b13 b12 b11 b10
0 0 0
Un\G46
b6 to b15 information is fixed at 0
required. (Refer to Section 3.3.2.)
b15 b14 b13 b12 b11 b10
0 0 0 0
b6 to b15 information is fixed at 0
b9 b8
0 0 0 0 0
b9 b8 b7
0 0 0 0 0
b7 b6 b5 b4 b3
CH CH CH
0 0
6 5 4
1: Rate control disable
0: Rate control enable
b6 b5 b4 b3 b2
CH CH CH CH
0
6 5 4 3
1: Warning output disable
0: Warning output enable
b2 b1 b0
CH CH CH
3 2 1
b1 b0
CH CH
2 1