Programming Example Using The Utility Package; Operating The Utility Package - Mitsubishi Q62DA User Manual

6 PROGRAMMING

6.1 Programming Example Using the Utility Package

6.1.1 Operating the utility package

6
6 - 2
(1) Initial setting (see Section 5.4.)
Set the D/A conversion enable/disable setting for CH1 and CH2, to Enable.
(2) Automatic refresh setting (see Section 5.5.)
Set the device to store the Digital value and Set value check code for CH1 and
CH2, and the Error code.
(3) Writing the intelligent function module parameters
(see Section 5.3.3)
Write the intelligent function module parameters to the CPU module.
This operation is performed using the parameter setting module selection screen.
MELSEC-Q
6 - 2