Check Operation Of The Watchdog Countdown Function - GE MP100 Series Service Manual

Checkout procedures

Check operation of the Watchdog countdown function

7-18
Property

External Speaker
Status


Internal Speaker
Status

NOTE
The CIC Pro center application must be stopped before conducting this test.
CAUTION
During shutdown or while in administrator mode, beds displayed by
the CIC Pro center will be unmonitored if not displayed by a
different CIC Pro center.
1. Log on to the CIC Pro center as Administrator on page
2. From the desktop, launch Internet Explorer.
3. If you have not already logged onto Webmin,
interface on page 4-7.
4. Click Diagnostics > Preventative Maintenance > Watchdog Test.
5. On the Watchdog Testing screen, click Start Test.
Once the Watchdog timer counts down to zero, the CIC Pro center will reboot
and must return to the normal state.
CIC Pro™
Value
Plugged (1) indicates connector is plugged into the external
speaker socket.
Unplugged (0) indicates nothing is plugged into the external
speaker socket.
Plugged (1) indicates connector is plugged into the internal
speaker socket.
Unplugged (0) indicates nothing is plugged into the internal
speaker socket.
Log on to the Webmin service
4-3.
2026419-033E