Run Log File Compression Configuration Utility; Equipment/Tools Required; Create A Log File Compression Configuration Utility Usb Memory Stick - GE MP100 Series Service Manual

Configuration

Run Log File Compression Configuration Utility

Equipment/tools required

Create a Log File Compression Configuration Utility USB memory
stick
6-88
This utility reconfigures the log file compression mechanism and is applicable to CIC
Pro centers running software v5.1.0 only. If this utility is not applied, it could
potentially result in loss of the collection of clinical log files when there is no user
activity on the CIC Pro center between midnight and the time the log compressor
compresses the files by 3:00 am.

Service PC
 Log File Compression Configuration Utility software CD

Blank USB memory stick (minimum 128 MB)

CIC Pro center running software version 5.1.0
1. Insert the USB memory stick into an available USB port on the service computer.
2. Insert the Log Compression Configuration Utility software CD into the service
PC CD drive.
NOTE
Use the Help link for details on usage, prerequisites and troubleshooting.
3. Click List USB Drive(s) on the GE Patch Distribution Utility window.
NOTE
The utility displays a message identifying the USB drives that are connected
to the service PC.
4. Select the appropriate USB drive from the drop-down list.
NOTE
This procedure erases any existing data on the USB memory stick. If more
than one USB memory stick is identified, ensure the correct one is chosen.
5. Click Make USB stick.
6. Click OK to confirm and continue. The utility will display the progress of the
operation.
NOTE
In case the utility encounters an error (e.g., the USB memory stick does not
contain sufficient memory), try a different USB memory stick with at least
128 MB of available memory, and repeat steps
7. Wait for the message indicating that the operation is complete.
CIC Pro™
1 through 6.
2026419-033E