Perform Safe Restart Of The Cic Pro Center - GE MP100 Series Service Manual

Troubleshooting

Perform safe restart of the CIC Pro center

8-30
3. From the SMART Drive Status window, select the drive from the drop-down list
and click Show.
4. Click on either the Run Short Self Test or the Run Extended Self Test button,
depending on the test you want to execute.
NOTE

The short self test typically takes a minute or two to complete.
 The extended self test takes approximately one hour to complete.
5. Click View Self Test Log to view the logs resulting from the test.
WARNING
If a USB memory stick (blank or containing data) is connected to the
USB port of this device (CIC Pro center or ApexPro), you need to
remove it prior to restarting the CIC Pro center. Otherwise, the
system software may not restart.
CIC Pro™ 2026419-033E