Diagnostics Tab - GE MP100 Series Service Manual

Service interfaces

Diagnostics tab

4-12
Option
Set Flags
Software Management
Time Date
Logout
The following links are found on the Diagnostics tab.
Option
All CICs
Full Disclosure
Logfiles
CIC Pro™
Function
Configure the following settings:

No Comm. See Configure the NO COMM alarm setting,
if applicable on page 6-22.

Force Age. See Configure force age setting, if applicable
on page 6-23.

Multiviewer Alarm Audio.
alarm audio setting, if applicable on page 6-24.

ADU Alarm Audio. See Configure ADU alarm audio
setting, if applicable on page 6-26.
Upgrade the software and perform software maintenance.
Upgrade software on page 12-1.
Set the time and date of the CIC Pro center.
of-day or the date on page 6-68.
Log off the Webmin service interface and display the logon
window.
Function
Check for time zone, daylight saving time, and CARESCAPE
Network IP address errors for all CIC Pro centers on the
network. See Pre-configuration instructions on page 6-2.
Set the Full disclosure mode and display a list of full disclosure
beds. See Set full disclosure mode on page 8-13
disclosure beds on page 8-12.
Download or view the CIC Pro center log files.
on page 8-20.
See Configure multiviewer
See
See Set the time-
and List full
See Log files
2026419-033E