ABB UMC100.3 Manual page 63

C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—
Function block reference
—
Function Blocks for Expansion Modules
The access to inputs, outputs and process data of the expansion modules is realised with function blocks. The following
section describes these function blocks.
—
DX1xx Inputs
This function block provides access to the digital inputs of the modules DX122 and DX111
.
Function Block
Outputs
Inputs
Parameters
—
DX1xx Status
Function Block
Outputs
Inputs
Parameters
Signal Name
DI0 ... DI7: Digital inputs on the module
-
DX1xx DI Delay
Signal Name
Active: If true the DX1xx is connected and running.
-
-
63
Data Type
Boolean
Data Type
Boolean
-