ABB UMC100.3 Manual page 20

20 C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—
Creating the first application
In this example an analog value is connected to a binary input, which is not correct.
To download the logic use the Apply button. The logic will only be downloaded if there is no error. The message window
shows that apply and writing was successful. Download will take several seconds.
To show the online status, use the Online button. The screen is updated cyclically and shows a"1" signal in red color, "0" is
shown in blue color. The message window shows, in which cyles the screen is updated.