ABB UMC100.3 Manual page 26

26 C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—
Function block reference
—
UMC Input Function Blocks
The function blocks described here represent the different inputs of the UMC100 device.
• Digital inputs DI0-DI5
• Cyclic fieldbus command telegramms
Word Byte Function Block
0 0 Binary Command 0
1 Binary Command 1
1 2 Binary Command 2
3 Binary Command 3
2 4 Analogue Command 0
5
3 6
7
• Acyclic fieldbus command telegramms
• Commands from the LCD panel
—
Basic Input
This function bock represents the digital inputs of the UMC100. All six digital input signals are transparently available for
further processing. The different functions of the three multifunction inputs DI0, DI1 or DI2 are also available. Each function
has its separate output pin. To use the multifunction inputs the related parameters must be set accordingly. See the internal
function diagram of the block on the next page.
Function Block