ABB UMC100.3 Manual page 40

40 C U S T O M A P P L I C AT I O N E D I T O R M A N U A L
—
Function block reference
—
Analog Mux (Multiplexer)
Allows to switch between multiple input words based on 2 digital inputs in a binary manner
Function Block
Inputs
Output
Parameters
Signal Name
Sel1/Sel2: Selects which input is connected to the output. Selection is done in BCD
manner: 00=In1, 01=In2, 10=In3, 11=In4
In1/2/3/4 (W): Analogue input word
Out (W): Analog value selected from one of the inputs. By default In1 is used.
-
Data Type
Boolean
Word
Word