• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Across Feed] in [Image Position: Side 1] / [Image Position: Side 2] in
1101 [Image Position] in "Advanced Settings" takes precedence.
0103 [Registration Gate: Paper Buckle Amount]
To correct skew, adjust the paper bending allowance at registration. Use [+] or [-] to increase or
decrease the bending allowance.
If the paper arching is too small or too large, the image may be misaligned or the paper may become
skewed.
This setting is only effective for paper of Paper Weight 0 to 4.
When using paper of Paper Weight 5 to 8, the setting specified in 0104 [Registration Gate: Paper
Buckle Amount: Thick Paper] takes precedence.
Setting Item
[Tray 1-3]
[Tray 4-A, T1-T4]
[2 Sided]
0104 [Registration Gate: Paper Buckle Amount: Thick Paper]
To correct skew, adjust the paper bending allowance at registration. Use [+] or [-] to increase or
decrease the bending allowance.
By adjusting the degree of paper arching for relatively stiff thick paper, you can prevent image
misalignment and paper skew.
This setting is only effective for paper of Paper Weight 5 to 8.
For paper of Paper Weight 0 to 4, specify 0103 [Registration Gate: Paper Buckle Amount].
Default
Max.
Value
Value
2
5
[Main Unit: Image Position]
Min.
Step
Value
-5
1
Unit
mm
25