4. Details of Menu Items in Advanced Settings
Leading edge
Trailing Edge
Adjust the mask width at the trailing edge of the image.
By increasing the mask width, you can increase the paper margin at the trailing edge of the paper.
Press [ ] to increase the mask width and [ ] to reduce it.
Leading edge
Setting Item
01: Leading Edge/02: Trailing Edge
1211 [Fusing Nip Width]
Adjust the nip width between the fusing belt and the pressure roller.
You can reduce creases produced during printing.
The default setting is 2. To reduce creases, decrease the setting value.
When printing envelopes, the recommended setting value is 4.
Decreasing the setting value may result in insufficient toner fusing, causing toner to shed from the
envelopes (cold offset).
132
Paper feed direction
Top
Trailing edge
Bottom
Paper feed direction
Top
Trailing edge
Bottom
Max. Value
6.0
CEZ020
CEZ021
Min. Value
0.0
Step
Unit
0.1
mm