0506 [Execute Developer Exhaust]; 0507 [Developer Exhaust: Result] - Ricoh Pro 8300S Operating Instructions Manual

2. Details of Menu Items in Adjustment Settings for Operators
For details about filling/discharging developer, see the Replacement Guide.
Code
1 Succeeded (developer
replenished)
2 Developer not discharged
3 Developer not replenished
9 Replenishment quit forcefully

0506 [Execute Developer Exhaust]

Execute the developer exhaust.
Use this to replace the developer. This operation can take up to 3 minutes. Do not pull the unit out during
the operation. For details about discharging developer, see the Replacement Guide.
[Developer Exhaust]

0507 [Developer Exhaust: Result]

Display the result of the developer exhaust.
If the developer discharge fails, check the displayed code and troubleshoot the problem accordingly. If
countermeasures do not work or a code that is not on the list is displayed, contact your service
representative.
46
Status
-
Developer in the developer
unit has not been
discharged.
• The developer bottle is
• The developer bottle is
• The front covers have
• The power was turned
Setting Item
Causes
not attached to the
inlet.
attached to the inlet,
but its seal has not
been pulled out.
been closed.
off during the
operation.
Remarks
Press [Execute].
Solutions
-
A new developer bottle is
required. Contact your
service representative.
Attach a new developer
bottle to the inlet, pull out
the seal, and then try the
operation again.
Open the front covers, turn
on the main power, and
then try the operation again.