0305 [Skew Detection Level] - Ricoh Pro 8300S Operating Instructions Manual

2. Details of Menu Items in Adjustment Settings for Operators
[Tray 1]
[Tray 2]
[Tray 3]
[Tray 4]
[Tray 5]
[Tray 6]
[Tray A]
[2 Sided]
[Tray T1]
[Tray T2]
[Tray T3]
[Tray T4]
• You can adjust the skew detection level by specifying 0305 [Skew Detection Level].
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Skew Detection] in 1341 [Jam Detection] in "Advanced Settings"
takes precedence.

0305 [Skew Detection Level]

Adjust skew detection level.
By increasing the permissible range of skew, you can make the machine print without stopping for skews
within the permissible range.
This is enabled only if 0304 [Skew Detection] is set to [On].
Press [ ] to increase the permissible range or [ ] to decrease it.
38
Setting Items Values
[Off]
[On]
Default Value
[On]