1341 [Jam Detection] - Ricoh Pro 8300S Operating Instructions Manual

Fan Level
Adjust the fan level of Interposer.
Press [ ] to increase the airflow, or [ ] to decrease.
Setting Item
02: Setting
Pickup Assist
Set the operation of the paper feed roller of Interposer.
If [On] is set, contact time of the roller is extended.
Setting Item
03: Setting

1341 [Jam Detection]

Double Feed Detection
Specify whether or not to detect double feeding of paper.
If [On] is selected, the machine stops when it detects paper double feeding, so as to prevent mixing of
unprinted paper.
The machine may not correctly detect double feeding when using special paper (two-ply paper such as
release paper). In such a case, select [Off].
Setting Item
01: Setting
Paper Edge Detection
Adjust the luminance of the contact image sensor (CIS).
The machine's contact image sensor (CIS) may fail to correctly detect paper edges when dark colored
paper or paper printed to its edges is used. In such a case, adjust the luminance so that the sensor can
correctly detect paper edges.
Max. Value Min. Value
100 10
[Off]
[On]
[Off]
[On]
[Machine: Paper Feed/ Output]
Step Unit
10 %
Values
Values
139