Setting Items
[Temperature]
[Humidity]
0518 [Temperature / Humidity Outside]
Display temperature and humidity around the machine.
If your service representative requests it, report this information.
Setting Items
[Temperature]
[Humidity]
0519 [Display System Message for When Outside Optimal Range]
Specify whether or not to display the banner to indicate conditions outside the recommended operating
environment.
Specify whether or not to display the banner when using the machine in conditions outside the
recommended operating environment.
Setting Items
[High Temperature/Humidity]
[Low Temperature/Humidity]
0521 [Manage Multiple Fusing Units by Counter]
Set the counter for fuser unit replacement.
This setting can be used with different fuser units for different paper sizes.
Counter information for each fuser unit can be reflected when fuser units are replaced.
Up to four fuser units can be recorded and the counter of each part of the fuser unit is displayed.
Values
Value display only.
Values
Value display only.
Values
[Off]
[On]
[Main Unit: Maintenance]
Default Value
[On]
51