0309 [Paper Separation Time] - Ricoh Pro 8300S Operating Instructions Manual

Setting Items
[Tray 4: Wide LCIT]
[Tray 5: Wide LCIT]
[Tray 6: Wide LCIT]
[Tray 4: LCIT]
[Tray 5: LCIT]
[Tray 6: LCIT]
[Tray A]
• This setting is not effective for paper fed from paper trays with custom paper presets. For such
paper, the value specified in [Pickup Assist] in 1321 [Main/3-Tray LCIT/Bypass] on "Advanced
Settings" takes precedence.

0309 [Paper Separation Time]

Adjust the suspension time while the feeding sensor being turned on.
To prevent multi-feeding, adjust the paper separation time for feeding paper when using three-tray wide
LCT, LCT, and multi bypass tray.
Adjust this parameter if multi-feeding problems occur frequently.
Press [ ] to increase the paper separation time or [ ] to decrease.
Setting Items
[Tray 4: Wide LCIT]
[Tray 5: Wide LCIT]
[Tray 6: Wide LCIT]
[Tray 4: LCIT]
[Tray 5: LCIT]
[Tray 6: LCIT]
[Tray A]
Values
[Auto]
[On]
[Off]
Default Max.
Value Value
0 1000
[Main Unit: Paper Feed/ Output]
Default Value
[Auto]
Min.
Step
Value
0 5
Unit
msec
41