Table of Contents
Advertisement
Preserve EMI Compliance
To preserve compliance with applicable standards and regulations for electromagnetic
interference (EMI), during operation all front and rear openings on the chassis or board
face plates must be filled with an appropriate card or covered with a filler panel. If the
EMI barrier is open, devices may cause or be susceptible to excessive interference.
Rear Transition Module
Product Damage
Inserting or removing modules in a non-hot swap chassis with the power applied may
result in damage to the module components. The CPCI-6020-MCPTM-01 is not a hot
swap board, but it may be installed in a hot swap chassis with power applied if the
corresponding CPCI-6020 is removed from the front slot first.
Environment
Always dispose of used AMC modules, system components and RTMs according to
your country's legislation and manufacturer's instructions.
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Safety Notes
23
Advertisement
Table of Contents
