Table of Contents
Advertisement
About this Manual
Overview of Contents
This manual provides the information required to install and configure an CPCI-6020 Single
Board Computer. Moreover, this manual provides specific preparation and installation
information and data applicable to the board. The CPCI-6020 was previously offered as the
MCP820 Single Board Computer.
The CPCI-6020 is a high-performance CompactPCI single board computer featuring the
MPC7410 with Alti-Vec™ technology for algorithmic intensive computational capabilities.
This manual is divided into the following chapters and appendices:
Safety
Notes, a collection of standard product safety notes for the CPCI-6020 in English.
Sicherheitshinweise, a collection of standard product safety ntoes for the CPCI-6020 translated
to German.
Chapter 1,
Introduction, lists the features of the CPCI-6020 baseboard, standards compliances,
model numbers for boards, memory, and RTMs.
Chapter 2, Hardware Preparation and
unpacking instructions, environmental and power requirement, and how to prepare and install
the CompactFlash, a PMC module, and the CPCI-6020 baseboard.
Chapter 3, Controls, LEDs, and Connectors
face plate details. This chapter also gives descriptions for the onboard and front panel LEDs
and connections and pinout information for connectors, headers and jumpers.
Chapter 4, Functional Description
and the CPCI-6020-MCPTM-01 transition module. These descriptions include both
programming and hardware characteristics of major components.
Chapter 5, Firmware
diagnostic and initialization firmware PPCBug. This chapter also briefly describes how to use
the debugger commands.
Chapter 6, RAM500 Memory Expansion Module
memory mezzanine. If also provides information on pinouts and features.
Chapter 7, Transition Module Preparation and
6020-MCPTM-01 rear transition module. The chapter provides illustrations of the RTM
components and face plate details. It describes jumper settings, port configuration diagrams,
and procedures for installing SIMs and PIMs. Pin assignment tables for the RTM are included
in this chapter.
Chapter 8, CNFG and ENV Commands
of PPCBug to modify certain parameters within the CPCI-6020.
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Installation, includes a description of the CPCI-6020,
provides illustrations of the board components and
describes the major features of the CPCI-6020 baseboard
describes the role, process and commands employed by the CPCI-6020
provides information for installing the RAM500
Installation, includes a description of the CPCI-
describes how to use the CNFG and ENV commands
13
Advertisement
Table of Contents
