Communication Settings - Barco iCon H250 User Manual

1.3

Communication settings

Baud rate
Defines the speed of the data transfer. The baud rate can be set using the menu structure.
Consult the Owner's manual of the projector on how to change the baud rate setting.
Data Bits
Eight data bits are used for each character of the data transfer.
Parity
There is no parity bit used to perform error checking.
Stop Bits
One stop bit is used to define the end of a character.
R59770077 RS 232 SERIAL COMMUNICATIONS FOR ICON H250/400 16/02/2007
1. Serial communication basics
5