Profibus-Specific Parameter List - Danfoss VLT Midi Drive FC 280 Programming Manual

Parameters
9-91 Changed Parameters (2)
Array [116]
No LCP access
Read only
Range:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
9-92 Changed Parameters (3)
Array [116]
No LCP access
Read only
Range:
6 6
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
9-93 Changed Parameters (4)
Array [116]
No LCP access
Read only
Range:
0 [0 - 9999] This parameter shows a list of all the frequency
*
9-94 Changed Parameters (5)
Array [116]
No LCP Address
Read only
Range:
0 [0 - 9999 ] This parameter shows a list of all the frequency
*
16-84 Comm. Option STW
Range:
0 [0 - 65535 ] Shows the status word of the extended
*
16-90 Alarm Word
Range:
0 [0 - 4294967295 ] Shows the alarm word sent via the serial
*
16-91 Alarm Word 2
Range:
0 [0 - 4294967295] View the alarm word sent via the serial
*
42
PROFIBUS DP
Function:
converter parameters deviating from default
setting.
Function:
converter parameters deviating from default
setting.
Function:
converter parameters deviating from default
setting.
Function:
converter parameters deviating from default
setting.
Function:
fieldbus communication option.
For more information, refer to the relevant
fieldbus manual.
Function:
communication port in hex code.
Function:
communication port in hex code.
Danfoss A/S © 05/2016 All rights reserved.
16-92 Warning Word
Range: Function:
0 [0 - 4294967295 ] Shows the warning word sent via the
*
serial communication port in hex code.
16-93 Warning Word 2
Range: Function:
0 [0 - 4294967295] View the warning word sent via the serial
*
communication port in hex code.
16-94 Ext. Status Word
Range: Function:
0 [0 - 4294967295] Returns the extended warning word sent
*
via the serial communication port in hex
code.

6.3 PROFIBUS-specific Parameter List

6.3.1 Introduction
Changes during operation
True means that the parameter can be changed while the
frequency converter is in operation. False means that the
frequency converter must be stopped before a change can
be made.
4 Set-up
All set-ups: The parameter can be set individually in each
of the 4 set-ups, for example, 1 single parameter can have
4 different data values.
1 set-up: The data value is same in all set-ups.
Data Description
type
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible string
33 Normalized value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
Table 6.2 Data Type
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
MG07F102