Danfoss VLT Midi Drive FC 280 Programming Manual page 40

Parameters
8-84 Slave Messages Sent
Range:
0 [0 - 4294967295] This parameter shows the number of
*
8-85 Slave Timeout Errors
Range:
0 [0 - 4294967295] This parameter shows the number of slave
*
8-88 Reset FC port Diagnostics
Reset all FC port diagnostic counters.
Option:
6 6
[0] Do not reset
*
[1] Reset counter
8-90 Bus Jog 1 Speed
Range:
100 RPM [ 0 - 1500
*
RPM]
8-91 Bus Jog 2 Speed
Range:
200 RPM [ 0 - 1500
*
RPM]
38
PROFIBUS DP
Function:
messages sent from the slave.
Function:
timeout errors.
Function:
Function:
Enter the jog speed. This is a fixed
jog speed activated via the serial
port or fieldbus option.
Function:
Enter the jog speed. This value is a
fixed jog speed activated via the
serial port or fieldbus option.
Danfoss A/S © 05/2016 All rights reserved. MG07F102