Required Service Tools - Life Fitness E5 Service Manual

Total-body elliptical cross-trainers
Hide thumbs Also See for E5:
Table of Contents

Advertisement

Introduction: Required Service Tools
Unless otherwise specifi ed, these tools are required to perform the service procedures in this manual.
1.
Snap Ring Pliers (internal and external)
2.
Allen wrenches (metric set)
3.
Offset screwdriver
4.
Phillips screwdriver
5.
Short Phillips screwdriver
6.
Needle nose pliers
7.
Utility knife
8.
Socket wrenches (metric set)
9.
6mm deep socket
10.
Open end wrenches (metric set)
11.
Rubber mallet
12.
4" x 4" block of wood
13.
Ruler
14.
Multimeter
15.
Blue Loctite®
Note: Specialized tools may be required to complete some service procedures safely (see list below). Using tools
improperly can result in damage to equipment or personal injury.
WARNING: Wearing a static discharge device (ESD strap, Life Fitness part #171-419) when servicing electronic
components. Electrostatic discharge can damage electronic components, either through outright failure or through
degraded performance and shortened life, neither of which may be immediately detectable.
10

Advertisement

Table of Contents
loading

Table of Contents