Figure 2-4: Load Orientations; Figure 2-5: Cantilevered Load Capabilities - Aerotech ANT130R Sieries Hardware Manual

Mechanical Specifications and Installation
Applied loads should be symmetrically distributed whenever possible (i.e., the payload should be centered
on the stage table and the entire stage should be centered on the support structure).
If cantilevered loads are applied, refer to
the maximum allowable load.
18
Figure 2-4 to find the loading condition. Refer to
Figure 2-4: Load Orientations
Figure 2-5: Cantilevered Load Capabilities
Chapter 2
ANT130R Hardware Manual
Figure 2-5
www.aerotech.com
to find