NTN-SNR LINEAR AXIS AXC Series Manual page 51

Linear Motor Axis AXLM
• Linear Motor Axis for high loads in moment direction as well the highest demands on positioning accuracy, repeatability
and dynamics
• Aluminum profile with profile grooves or aluminum plates as base material
• 3 standard sizes from 155 mm up to 325 mm table wide
• 2 parallel linear guides as guiding system
• Linear motors with different feeding forces selectable
• Linear motors optional with air or water cooling
• Optimal protection of the inside placed guiding and drive elements by the optional use of bellows or cover plates (Figures
5.13 and 5.14)
Figure 5.13 _ AXLM with cover plate Figure 5.14 __ AXLM with bellows
49