NTN-SNR LINEAR AXIS AXC Series Manual page 241

R
Rack and pinion drive
__7, 9, 11, 17, 34, 35, 37, 40, 42, 50, 52, 142 - 148, 186
Rigidity ______________________________________ 10, 11, 18
Running parallelism ___________________________ 15, 19, 130
S
Safety breaks __________________________________ 211, 227
Safety instructions ____________________________________ 16
Selection criteria _____________________________________ 14
Side seals ____________________________________ 8, 41, 224
Slider unit _________________________ 7, 8, 11, 13, 15, 36, 37
Slider unit with brush wipers _______________________ 8
Slider unit with thread holes ________________________ 8
Slider unit with profile grooves. _____________________ 8
Slider unit with side seals __________________________ 8
Slider unit with lateral placed grease nipples __________ 8
Slider unit with grease nipples on the front side ________ 8
Sliding blocks _______________________________ 24, 166, 167
Special solutions _______________________________228 - 230
Standards ___________________________________________ 15
Starting torque _________________________________ 15, 130
Starting torque of ball screws ______________________ 15
Static load capacity ___________________________________ 17
Structure _____________________________________________ 7
Support unit _________________________________________ 10
Switches ______________________________________194 - 204
Cable guiding __________________________________ 195
Line splitter ____________________________________ 202
Mounting options __________________________195 - 201
Possible switch combinations _______________ 203, 204
Switch versions ________________________________ 194
Technical data _________________________________ 202
System Program Axis _______________________ 50, 131 - 154
System Program Axis
with lateral toothed belt drive ________________149 - 151
System Program Axis
with rack and pinion drive ___________________134 - 148
System Program Axis
with toothed belt drive ______________________152 - 154
System Program Axis
with toothed belt / Ω - drive _________________131 - 133
T
Telescopic Axis ____________ 37, 38, 50, 131 - 133, 142 - 148
Telescopic Axis with rack and
pinion drive / toothed belt drive, horizontal. ____142 - 148
Telescopic Axis with rack and
pinion drive / toothed belt drive, vertical _______142 - 148
Telescopic Axis with toothed belt / Ω - drive ___131 - 133
Toothed belt clamping _________________________________ 9
Toothed belt drive _____________ 9, 19, 21, 26, 27, 36, 43, 46,
________ 47, 50, 51, 54 - 60, 79 - 81, 86 - 90, 119 - 154
Toothed belt / Ω - drive __________73 - 78, 99 - 102, 131 - 133
Toothed belt tension ____________________________ 9, 30, 31
Track roller guide _________ 7, 8, 12, 13, 17, 34, 36, 38, 39, 42
Polymer track roller guide ______________________13, 39
Transportation _______________________________________ 22
Tube connection ____________________________________ 212
Type code _______________________ 180, 191, 208, 220 - 223
Type code axis systems _________________________ 223
Type code connecting shaft ______________________ 180
Type code coupling AXBG_S_G __________________ 191
Type code gantry support legs ____________________ 208
Type code single axis ______________________220 - 222
W
Wall mounting _______________________________________ 21
Wear part sets _______________________________________ 45
239