NTN-SNR LINEAR AXIS AXC Series Manual page 224

Guiding system (not for AXBG)
A:
Linear guide, short table
B: Linear guide, standard table
C: Linear guide, long table
D:
Two parallel linear guides, standard table
E:
Two parallel linear guides, long table
F: Without guiding system (feeding axis), standard table
L:
Track roller guide, standard table
6 B
M:
Track roller guide, long table
P: Polymer track roller guide, standard table
Guiding system AXBG
A: One carriage, long
B:
Two carriages, long
C:
One carriage,short
D: Two carriages, short
7 1000
Stroke [mm]
Total length [mm]
8 1440
Stroke + additional length according catalogue description (for AXBG profile length)
Configuration versions / Protection against pollution
9 A
0: Without options
A...Z:
see Chapter 8.3.1
Additional options for screw drive axis (not for AXLT, AXBG):
0:
Without screw drive support units
1...4: Number of screw drive support units
10 2
AXBG:
N:
Normal precision
P: P precision
Switch combination left
11 00
See Chapter 6.3
Switch combination right
12 00
See Chapter 6.3
Drive adaption
13 0 0:
no drive adaption
A...Z: see Chapter 6.2.3, 6.2.4
Special version
14 0
0: without special options
A...Z:
According to drawing or text description (Index (A... Z) is given from NTN-SNR)
X: Index for special options at all positions in the type code
222