Cross Connection - NTN-SNR LINEAR AXIS AXC Series Manual

6.1.5

Cross connection

Cross connections (Figure 6.11) are connecting elements for the mounting of 2 – axis systems in which the tabletops of the respective
axis are assembled together. The cross connections include all necessary connecting elements inclusive the screws.
Figure 6.11 __ Cross connection AXC / AXC and AXC / AXDL
The type codes and dimensions including ID number of the cross connections are shown in Figure 6.12 and Table 6.7.
1 Centerline of the Axis = middle slider plate
2 Note the installation side oft he switches for die Y – axis with Typ AXC60
Figure 6.12 __ AX – Cross connection
171
1 Alignment by cylindrical pin
or Mounting edge